TCC04 4 Channel EGT to CAN Module

Link TCC04 4-Channel EGT to CAN Module, Powered by CANchecked

The TCC04 EGT to CAN module allows connection of up to four Type-K thermocouples, transmitting temperature data via CAN bus and/or displaying it directly on a wireless-enabled device.

Type-K thermocouples suit various applications, including exhaust gas temperature (EGT) monitoring, intercooler temperature measurements, turbo housing, cylinder head, water, oil temperatures, and more. The TCC04 module performs cold junction compensation across all channels, providing a measurement range of 0 to 1250°C with 0.25°C resolution (14-bit).

The module includes a four-pin DTM connector compatible with Link’s standard CAN pinout and CAN cables. It supports CAN 2.0A/B standards with flexible configuration options.

Wireless connectivity allows for easy configuration and firmware updates via smartphone or PC, along with real-time monitoring of temperatures and thermocouple statuses.

4 x cold junction compensated type-K inputs
CAN Bus connection to ECU (Pre-Configured for Link ECU)
Measuring range from 0 to 1250°C (32 to 2282°F) with 0.25°C resolution
Detection of short circuit to ground or if no type-K is connected
Standard mini k thermocouple connector
Full configuration and monitoring over wireless

•    DTM 4 CAN Pinout (Supports Links CAN pinout schema and CAN cables range)
Pin 1: 12V Pin 2: Ground Pin 3: Can Low Pin 4: Can High
•    Accuracy: maximum 2% deviation 
•    Dimension (L x W x H) – 97.3 x 31.5 x 34.6mm

Configuration Options:

The module can be configured via wireless:
•    Can Speed: 125kbps, 250kbps, 500kbps, 1Mbps
•    Emulation: Standard, Motec E888, Haltech TCA-4, TCA-8, Ecumaster EGT2Can, AEMnet
•    Change of standard Can Bus ID